Savin 1045 - Manual (Page 5)

i
NOTICE
R CAUTION:
Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Shielded interconnect cables must be employed with this equipment to ensure
compliance with the pertinent RF emission limits governing this device.
Although this equipment can use either loop disconnect or DTMF signalling,
only the performance of the DTMF signalling is subject to regulatory require-
ments for correct operation. It is therefore strongly recommended that the equip-
ment is set to use DTMF signalling for access to public or private emergency
services. DTMF signalling also provides faster call set up.
Note
❒ Some illustrations might be slightly different from your machine.
❒ Certain options might not be available in some countries. For details, please
contact your local dealer.
Important
Parts of this manual are subject to change without prior notice. In no event will
the company be liable for direct, indirect, special, incidental, or consequential
damages as a result of handling or operating the machine.
Trademarks
Microsoft ® , Windows ® and Windows NT ® are registered trademarks of Micro-
soft Corporation in the United States and/or other countries.
Other product names used herein are for identification purposes only and might
be trademarks of their respective companies. We disclaim any and all rights in
those marks.
Note
The proper names of the Windows operating systems are as follows:
• Microsoft
® Windows ® 95 operating system
• Microsoft ® Windows ® 98 operating system
• Microsoft ® Windows ® Millennium Edition (Windows Me) operating system
• Microsoft ® Windows ® 2000 Professional
Direct (or indirect) reflected eye contact with the laser beam may cause serious eye damage.
Safety precautions and interlock mechanisms have been designed to prevent any possible laser
beam exposure to the operator.