Savin 1045 - Manual (Page 173)

Changing Key Operator Settings
159
8
H
Press [OK].
I
Enter a Box Code.
Note
❒ To change Box Code, press the
{Clear/Stop} key or [Clear] and
try again. To change Box Name,
press [Box Name] and repeat step
G.
❒ If you make a mistake, press the
{Clear/Stop} key or [Clear] and
try again.
J
Specify the condition of registration.
Programing Receiving Stations
A Select Receiving Station
You can store 5 receiving sta-
tions.
B Specify receiving stations with
Quick Dials.
Note
❒ You can also specify receiving
stations with Group Dials.
❒ If the desired box is not shown,
press [
U U U U Prev.] or [T T T T Next].
C Press [OK].
Repeat from step 1 to specify
another receiving station.
Programing a Password
If you do not program a password,
go to step
K.
A Press [Password].
B Enter a password
Note
❒ If you make a mistake, press
the
{Clear/Stop} key or [Clear]
and try again.
C Press [OK].
K
Press [OK].
A box mode is shown next to box.
L
Press the
{{{{User Tools/Counter}}}} key.
The initial display is shown.
Deleting Transfer Boxes
Limitation
❒ If the specified SUB Code is not
programed as a Transfer Box, or
the messages of the box are pro-
gramed, you cannot delete it.
A
Press the
{{{{User Tools/Counter}}}} key.