Savin 1045 - Manual (Page 68)

Transmission Features
54
4
A
Press [Select Line].
B
Select the line you want to use.
When an optional ISDN Unit is In-
stalled.
When an optional ISDN Unit and
optional Extra G3 Unit are in-
stalled.
When an optional Extra G3 Unit is
installed.
When two optional Extra G3 Units
are installed.
C
Press [Exit].
The initial display is shown.
❖ ❖ ❖ ❖ Auto Identification
This feature is used when G4 is
selected. The machine first tries
a G4 communication and if it
cannot connect because the re-
ceiver is not a G4 terminal, it au-
tomatically switches to G3 and
redials.
Note
❒ If the G3 line at the destina-
tion is connected to the ISDN
via a TA (Terminal Adapter)
or a PABX, since the called
number is on ISDN, it is re-
garded as G4 and the Auto
Identification feature may
not automatically switch this
machine to G3.