Savin 1045 User Manual
Page 157
Changing Key Operator Settings
143
8
❖
❖
❖
❖ Forwarding
Use this feature to output the re-
ceived originals, and then transfer
them to the senders which are pro-
gramed beforehand. Registration
of a place outside your company as
the other end will enable you to see
your reception there.
To discriminate between the other
ends, depends on the incoming
sender, such as transferring origi-
nals o n ly receiv ed from p ro-
gramed senders (special senders),
you have to program the sender
with a transfer end.
Note
❒ To use this feature, program
your Special Senders, and then
select "ON" in "Forwarding"
that is in "Reception Mode".
The factory default is set to
"OFF ".
⇒ P.126 “Reception
Mode”
❒ If you specify "ON" in "For-
warding" and select "Same as
basic settings", the fax message
will be forwarded to the other
ends programed in "Specify end
Receiver".
⇒ P.132 “Forward-
ing”
❒ If you do not program any Spe-
cial Senders, the machine trans-
fers all incoming documents to
the other end that is specified in
"Specify end Receiver".
❖
❖
❖
❖ RX File Print Qty
Use this feature to only print the
number of specified documents
copies received from programed
senders (Special Senders). If you
do not program any Special Send-
ers, the machine prints the number
of specified documents copies re-
ceived from all senders.
Limitation
❒ You cannot use multi-copy
printing with Polling Reception,
Confidential Reception, or
Memory Lock.
Note
❒ You can specify 1 to 10 copies.
❖
❖
❖
❖ Print 2 Sided
Use this feature to print on both
sides of the paper.
Limitation
❒ Optional duplex unit is re-
quired for using this feature.
❒ If you select bypass tray in the
"Paper Tray", duplex printing is
disabled.
❖
❖
❖
❖ Memory Lock
Use this feature to store incoming
documents from programed send-
ers (special senders) on memory
without outputting them. Persons
who do not know the Memory
Lock ID cannot output, and there-
fore this feature is useful for re-
ceiving confidential documents. If
you do not program any senders,
the machine receives the fax mes-
sage from all senders using Memo-
ry Lock reception.
Reference
⇒ P.164 “Programing a Memory
Lock ID”
Limitation
❒ If you program the same sender
in Memory Lock and Forward-
ing, Forwarding is disabled.
❖
❖
❖
❖ RX Reverse Printing
Use this feature to print the pages
in reverse order.
⇒ P.85 “Reverse
Order Printing”