Savin 1045 - Manual (Page 62)

Transmission Features
48
4
Specifying an End Receiver
When you make a Transfer Request,
you must specify the final destina-
tions (End Receivers) for your mes-
sage.
You cannot enter the numbers of the
End Receivers directly. Instead, enter
a simple code that describes where
the numbers are stored in the Trans-
fer Station (in Quick Dials or Groups).
The numbers must first have been
stored in Quick Dials or Groups in the
Transfer Station(s).
❖ ❖ ❖ ❖ Quick Dial
A Press [
q Quick Dial].
B Enter the number (2 or 3 digits)
of the Quick Dial where the End
Receiver is stored.
Note
❒ For example, to choose the
number stored in Quick Dial
01 in the Transfer station, en-
ter:
{0} {1}.
❒ Press [Add] if you wish to en-
ter more End Receivers.
❒ Press [U U U U Prev.] or [T T T T Next] to
see the End Receivers al-
ready entered. You can select
an End Receiver from this list
and remove it by pressing
the
{Clear/Stop} key or [Clear].
❒ To cancel the Transfer Re-
quest, press [Cancel].
❖ ❖ ❖ ❖ Speed Dial
A Press [
qp Speed Dial].
B Enter the number (2 or 3 digits)
of the Speed Dial code.
Note
❒ For example, to choose the
number stored in Speed Dial
12 in the Transfer Station, en-
ter:
{1} {2}
❒ Press [Add] if you wish to en-
ter more End Receivers.
❒ Press [U U U U Prev.] or [T T T T Next] to
see the End Receivers al-
ready entered. You can select
an End Receiver from this list
and remove it by pressing
the
{Clear/Stop} key or [Clear].
❒ To cancel the Transfer Re-
quest, press [Cancel].
❖ ❖ ❖ ❖ Group Dial
A Press [
qpp Group Dial].
B Enter the number (2 digits) of
the Group number.
Note
❒ For example, to choose the
number stored in Group Dial
04 in the Transfer station, en-
ter:
{0} {4}.
❒ Press [Add] if you wish to en-
ter more End Receivers.
❒ Press [U U U U Prev.] or [T T T T Next] to
see the End Receivers al-
ready entered. You can select
an End Receiver from this list
and remove it by pressing
the
{Clear/Stop} key or [Clear].
❒ To cancel the Transfer Re-
quest, press [Cancel].