Savin 1045 - Manual (Page 149)

Changing Key Operator Settings
135
8
D
Select [Memory Lock RX].
Note
❒ If "Memory Lock RX" is not
shown, press [
U U U U Prev.] or [T T T T
Next] .
E
Select [ON] or [OFF].
F
Press [OK].
Note
❒ To cancel this setting, press
[Cancel] and the display will re-
turn to step
D.
G
Press the
{{{{User Tools/Counter}}}} key.
The initial display is shown.
ECM
If a part of a transmission fails be-
cause of a line problem, the lost data
is automatically resent. For this fea-
ture to work, the other machine must
have ECM. By default, ECM is turned
on, but you can change this with the
following procedure.
Limitation
❒ If you turn ECM off, you cannot
use the following features:
• JBIG Transmission
• Super G3 Communication
A
Press the
{{{{User Tools/Counter}}}} key.
B
Press [Facsimile Features].
The Facsimile User Tools menu is
shown.
C
Select [Key Operator Tools].
The Key Operator Tools menu is
shown.