Savin 1045 - Manual (Page 109)

Programs
95
6
D
Select a program number you reg-
istered.
The initial display is shown.
Then, the registered fax number
and time is shown. Then Transmis-
sion Mode is selected.
E
Press the
{{{{Start}}}} key.
The fax number and specified time
are shown on the display and the
machine starts to scan the original.
Changing a Program Name
Limitation
❒ When a registered program is be-
ing used for a standby Memory
Transmission, you cannot change
the program name.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{Facsimile}
key.
B
Press the
{{{{Program}}}} key.
C
Press [Change Name].
D
Select the program number for
the name you want to change.
E
Reenter a program name.
Note
❒ Press [Delete] to cancel a pro-
gram name from changing.
F
Press [Exit].
The initial display is shown.