Savin 1045 User Manual

Page 203

Acceptable Types of Originals

189

❖

❖ Document Feeder (ADF)

Limitation

❒ There may be a difference in the size of the image when it is printed at the des-

tination.

❒ If you set an original larger than 11"×17"/A3 on the Exposure glass, only an

are of 11"

×17"/A3 is scanned.

Note

❒ Even if an original is correctly placed on the Exposure glass or in the Docu-

ment Feeder (ADF), a margin of 3mm around each edge of the original may
not be sent.

❒ If the receiver uses paper narrower than the original, the image will be re-

duced to fit the paper width.

⇒ P.67 “Auto Reduction”

❒ The machine detects paper sizes in the following ways.

• When you place an original in the Document Feeder (ADF), an original

wider than about 10.4" (263mm) is scanned as 11"

×17" size.

An original narrower than about 9.1" (230mm) will be sent as 8

×11" or

×14" size.

Originals up to 47" (1,200mm) in length can be scanned.

• Refer to the table below for the sizes the machine can detect when you

place an original on the Exposure glass. Because the machine scans in non-
standard size documents as one of the standard sizes, parts of the image
may be truncated depending on the length of the document. For details
about how to set non-standard size documents.

⇒ P.116 “Programing and

Changing a Scan Size”.

Length

Width

∼12.5"

12.5"

∼13.5"

13.5"

∼

∼9.6"

×11"L

×13"L

×14"L

9.6"

∼10.6"

×10"K

not detected

10"

×14"L

10.6"

∼

×11"K

not detected

11"

×17"L