Savin 1045 - Manual (Page 65)

On-Hook Dial
51
4
On-Hook Dial
This is just like using the external tel-
ephone, except you do not have to
pick up the external telephone before
dialing. Just press the
{On Hook Dial}
key and dial the number. If you hear
a voice, you can pick up the external
telephone and speak with the other
party.
Limitation
❒ This feature is not available in
some countries.
❒ On-Hook Dial does not work with
ISDN lines.
❒ This feature is not available for the
optional Extra G3 Interface Unit.
A
Place your original and select any
scan settings you require.
Reference
⇒ Chapter 2, "Setting Originals"
in the Basic Features manual
⇒ Chapter 2, "Scan Settings" in
the Basic Features manual
B
Press the
{{{{On Hook Dial}}}} key.
You will hear a low tone from the
internal speaker. If you wish to
cancel this operation, press the
{On
Hook Dial
} key again.
C
Dial.
The machine immediately dials the
destination. If you make a mistake,
press the
{On Hook Dial} or {Clear
Modes
} key and return to step B.
D
When the line is connected and
you hear a high-pitched tone,
press the
{{{{Start}}}} key.
• If you hear a voice, pick up the
external telephone before you
press the
{Start} key and notify
the destination that you want to
send a fax message (ask them to
switch to Facsimile mode).
• After transmission, the machine
will return to standby mode.