Savin 1045 - Manual (Page 100)

Reception Features
86
5
Page Reduction
If you turn this feature on and you re-
ceive a message that is longer than the
paper in the cassette, usually the ma-
chine prints it on two pages. The ma-
chine reduces the width and length of
the received image so that it will fit on
one page. If A4
L paper size is loaded
and a message of B4
L size is re-
ceived, the machine will reduce the
message to a single A4
L sheet.
Note
❒ By default, this feature is turned
off. Switch it on with the User Pa-
rameters.
⇒ P.136 “Changing the
User Parameters”(Switch10, Bit3)
TSI Print
Usually the sender's Fax Header is print-
ed on received messages. If the sender
has not programmed their Fax Header,
you will not be able to identify them.
However, if you turn this feature on, the
sender's Own Name or Own Fax
Number is printed instead so you can
find out where the message came from.
⇒ Chapter 3, "Initial settings and Ad-
justment" in the Basic Features manual
Note
❒ You can turn it on or off with the
User Parameters.
⇒ P.136 “Chang-
ing the User Parameters”(Switch02,
Bit3)
CIL/TID Print
The optional ISDN Unit is required.
Two features are provided for identi-
fication of messages received by G4
(ISDN). If turned on, this information
will be printed on every page.
The CIL (Call Identification Line) re-
fers to the combination of the receiv-
er's own fax number, name, the
sender's own fax number and name,
time, and page number. The default
setting is on. The TID refers to the
name programed by the sender in
their Fax Header. The default setting
is off.
Limitation
❒ These features are available only
when receiving in G4 mode.
❒ If the sender's TID contains dou-
ble-byte characters (for example
Chinese characters), the TID will
not be printed even if TID Print is
turned on.
Note
❒ You can turn CIL and TID on or off
with the User Parameters.
⇒ P.136
“ C h a n g i n g t h e U s e r P a r a m e -
ters”(Switch02, Bit5 or Bit6)
your machine
reduction
(A4 size)
(B4 size)
ND1X01E3