Standard message stamp – Savin 1045 User Manual

Page 71

Sub Transmission Mode

Specify the transmission mode
from [2 Sided from 1st Page] or [1 Sid-
ed for 1st Page]

The initial display is shown.

Press [OK].
The [2 Sided Original] key is high-
lighted, and "Original position"
and "Page Opening Orientation"
are shown above.

Dial and press the

{{{{Start}}}} key.

Standard Message Stamp

Use this feature to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: "Confidential", "Urgent",
"Please phone" and "Copy to corres.
section"
You can also program other messages.

Note

❒ While this feature is in use, the sec-

ond and third lines of the "Label
Insertion" are not printed.

❒ When there is an image around the

area where the standard message is
to be stamped, that image is deleted.

❒ To program a standard message,

use the "Program/Change/Delete
Standard Message" function.

⇒

P.111 “Programing Standard Mes-
sages”, P.112 “Deleting Standard
Messages”

Place your originals and select
any scan settings you require.

Press [Sub TX Mode].

The Sub Transmission Mode menu
is shown.

Select [Std. Message].

Select the standard message to be
stamped.

Note

❒ Programed standard messages

are shown in the keys. If there
are none programed, the mes-
sage "

pNot Programed" is

shown.

❒ The machine cannot stamp mul-

tiple standard messages.