Savin 1045 - Manual (Page 60)

Transmission Features
46
4
PWD Code
There are times you may wish to use
a password when receiving faxes by
polling with the SEP Code feature.
Limitation
❒ You can enter a password up to 20
digits long.
Note
❒ Messages you send using this fea-
ture are marked "PWD" on all re-
ports.
Transfer Request
Transfer Request allows fax machines
that have this feature to automatically
distribute incoming messages onto
multiple fax destinations. This feature
helps you save costs when you send
the same message to more than one
place in a distant area, and saves time
since many messages can be sent in a
single operation.
The diagram below may make the
concept clearer.
The Transfer Stations you specify
must be machines of the same make
as this machine and have the Transfer
Station function.
Preparation
Before you can use this feature,
you must program the Polling ID.
⇒ P.163 “Programing a Polling ID”
The following terminology is used in
this section.
❖ ❖ ❖ ❖ Requesting Party
The machine where the message
originates from.
❖ ❖ ❖ ❖ Transfer Station
The machine that forwards the in-
coming message to another desti-
nation.
❖ ❖ ❖ ❖ End Receiver
The final destination of the message,
or the machine the Transfer Station
sends to. End Receivers must be pro-
grammed into Quick Dials or
Groups in the Transfer Station.
Limitation
❒ Polling ID's of the requesting party
(this machine) and Transfer Sta-
tions must be identical.
❒ You can specify up to 99 Transfer
Stations in a Transfer Request.
However, you can only specify up
to 50 Transfer Stations from the
number keys.
❒ You can have up to 30 End Receiv-
ers per Transfer Station. If you
specify a Transfer Station Group,
the Group counts as a single re-
ceiver.
❒ The combined total of End Receiv-
ers and Transfer Stations you spec-
ify with the number keys cannot
exceed 99.
A
Place your original and select any
scan settings you require.
B
Dial a Transfer Station.
Note
❒ Enter the fax numbers of the
Transfer Stations with either
Quick Dials or the number keys.
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
Transfer
Station
Requesting
party
Transfer
Result Report
End Receiver
End Receiver
End Receiver
ND1X01E9