Savin 1045 User Manual

Page 131

Program/Delete Menu

117

Enter a Horizontal size with the
number keys.

Note

❒ For the horizontal length, speci-

fy from 128 to 1200mm or from
5.5 to 47 inches. You cannot
specify shorter than 128mm,
also longer than 1200mm.

❒ Each time you press [mm] or

[inch]

, the units change between

"mm" and "inch" alternately. If
you enter a length and change
the unit by pressing [mm] or
[inch]

, the length is converted

automatically according to the
unit (fractions are rounded off).
For Example, When you enter

{2}, {5} and {0} in millimeters
and change to "inch", the length
"9.8inch" is shown on the dis-
play. If you press [mm] or [inch]
again, "249mm" is displayed.

❒ If you make a mistake, press

[Clear]

and try again.

❒ To cancel a scan size from pro-

graming, press [Cancel].

Select a Vertical size.

Note

❒ A displayed vertical size differs

depending on selected unit.
When [mm] is selected, [Auto de-
tect]

, [210mm (A4)], [257mm(B4

JIS)]

, [297mm (A3)], [216mm (8 1/2)]

and [279mm (11)] are shown.
When [inch] is selected, [Auto de-
tect]

, [8.3inch (A4)], [10.1inch(B4

JIS)]

, [11.7inch (A3)], [8.5inch] and

[11.0inch]

are shown.

❒ To cancel a scan size from pro-

graming, press [Cancel].

Press [OK].

Press [Exit].

Press the

{{{{User Tools/Counter}}}} key.

The initial display is shown.