Savin 1045 - Manual (Page 63)

Advanced Features
49
4
Sub-address
The optional ISDN Unit is required.
ISDN allows two or more terminals
(such as a fax machine and digital tel-
ephone) to be connected to a single
line. These terminals are identified by
their sub-address numbers. If the ter-
minals connected to the line at a des-
tination are assigned sub-addresses,
dialing a sub-address allows you to
direct your fax message to a particu-
lar terminal at the destination.
Limitation
❒ Sub-addresses can only be used
with ISDN.
Note
❒ You can program a sub-address in
Quick Dial.
A
Select either G4 or G3 (ISDN).
Note
❒ When the optional ISDN Unit is
installed, the line used for G3 is
set to ISDN.
B
Dial the fax number with the
number keys.
C
Press [Adv. Features].
D
Select [Sub-address/UUI].
E
Select [Sub-address].
F
Enter the destination sub-address
with the number keys.
G
Press [OK].
H
Press [Exit].
I
Press the
{{{{Start}}}} key.