Sprint Nextel Palm Treo 800w - Manual (Page 91)

Section 2B: Using the Phone Features 91
Phone
Features
3. Depending on the state of your active call, pressing Flash (left softkey) or the
headset button (if the headset is attached and has a button on it) does one of the
following:
Ⅲ If you have two independent active calls (not a conference call), you can swap
between them if the second call is an incoming call.
Ⅲ If you have one active call, you can dial another number. You can press Flash
(left softkey) again to set up a conference call.
Ⅲ If you have two calls in conference with you, press Flash (left softkey) to hang
up the second call, and then dial another number to create a new three-way
conference call.
4. Press Power/End to exit Flash mode and end all calls.
Setting Up and Managing Speed-Dial Buttons
Your Treo lets you create both picture and text speed-dial buttons so that you can use Quick
Keys or select a button on the Today screen to quickly dial a number.
Did you know? When you highlight a speed-dial button and press and hold Center on the
5-way , you can choose another number for that contact. For example, if you
create a speed-dial button for your friend Steve’s home phone number, you
can highlight Steve’s speed-dial button, press and hold
Center , and then
choose his wireless number instead of his home number.