Receiving beamed information, Synchronizing over an infrared connection – Sprint Nextel Palm Treo 800w User Manual
Page 202
202
Section 3F: Using Wireless Connections
Receiving Beamed Information
1.
Turn on your screen.
2.
Point the IR port on your Treo directly at the IR port on the transmitting device.
3.
When the Receiving Data message appears, select Yes to receive the beam.
Synchronizing Over an Infrared Connection
1.
Set up your computer to receive infrared beams. (See ActiveSync Help on your
computer for details.)
2.
Point the IR port on your Treo directly at the IR port on your computer.
3.
On your Treo, press Start
and
select
Programs.
4.
Select ActiveSync
.
5.
Press Menu
(right softkey) and select Connect via IR.
6.
Select Sync.
Tip
If you can’t receive beamed information, press
Start
and select
Settings
.
Select the
Connections
tab, and then select
Beam
. Make sure the
Receive
all incoming beams
box is checked. If you still can’t receive information, try
a soft reset (see “Resetting Your Palm