Sprint Nextel Palm Treo 800w - Manual (Page 90)

90 Section 2B: Using the Phone Features
Making a Conference Call
When you’re on a call, you can make a second call and create a
three-way conference call. Additional charges may apply, and
minutes in your account may be deducted for each active call.
Please contact Sprint for more information.
1. Put the first call on hold, and then place a second call.
2. Press Conference (left softkey); this joins you and the
two other calls in a conference.
3. After you finish, press End conference (left softkey);
this ends the second call and returns you to the first call.
(If you’re ready to hang up both calls, press Power/End
instead.)
Using Flash Mode During a Call
Flash mode is an alternate way to manually manage your calls while one or more calls are
active. The preferred methods are described in “Making a Second Call” on page 89,
“Answering a Second Call (Call Waiting)” on page 89, and “Making a Conference Call” on
page 90. Flash mode is often used during a conference call when one of the calls has ended
but the other remains connected.
1. While a call is in progress, press Phone/Talk from Active Call view.
2. Select Send Key (Flash) to enter Flash mode.
Did you know? If one of the people you called hangs up, you and the remaining caller stay
connected. The screen does not change to indicate that one of the callers
has hung up. If you initiated the call and are the first to hang up, all three
callers are disconnected.