Checking battery power – Sprint Nextel Palm Treo 800w User Manual
Page 30

30
Section 1A: Setting Up Your Palm
®
Treo™ 800
W
Smart Device
3.
To confirm that your Treo is being charged, wait about 30 seconds and then check the
indicator light.
Ⅲ
Solid red: Your Treo is being charged and the battery is less than 90% full.
Ⅲ
Solid green: Your Treo is charged and the battery is at least 90% full.
If the battery is fully drained, it may take a few minutes for the indicator light to turn on when
you connect your Treo to the AC charger. If the indicator light still does not turn on,
double-check the cable connection and the electrical outlet to which it is connected.
Checking Battery Power
The onscreen battery icon displays the power status:
*
Battery Icon
ⅷ
Lightning bolt
: Battery is being charged.
ⅷ
Gray lightning bolt
: Battery is connected to a power source and is fully charged.
ⅷ
Full battery
: Battery is fully charged.
Tip
Although it takes longer to charge, you can also charge your Treo through
your computer by connecting them with the sync cable (see “Synchronizing
With a USB Connection” on page 50). However, if the battery is fully drained,
you must use the AC charger.
*