Sprint Nextel Palm Treo 800w - Manual (Page 302)

302 Section 6A: Managing Files and Applications
Inserting and Removing Expansion Cards
1. Open the door to the expansion card slot by lifting the left edge of the door and then
rotating the door downward.
2. Do either of the following:
Ⅲ To insert an expansion card, hold your Treo with the screen facing you and the card
with the label facing you, and then insert the card into the expansion card slot until
you feel it lock into place. (The contacts on the card should be facing away from
you.)
Ⅲ To remove an expansion card, press the card into the expansion card slot until it is
released from the slot.
Opening Applications on an Expansion Card
After you insert an expansion card into the expansion card slot, you can open any of the
applications stored on the expansion card.
Tip Your Treo has a push-push mechanism: push in gently to insert a card; push
in gently to remove it.
If the Ringer switch is set to Sound On , you hear a confirmation tone when
you insert or remove an expansion card.