Setting up a proxy server – Sprint Nextel Palm Treo 800w User Manual
Page 342
342
Section 6C: Customizing Your Palm
®
Treo™ 800
W
Smart Device
1.
Install your third-party VPN client (see “Installing Applications” on page 296).
2.
Press Start
and
select
Settings.
3.
Select the Connections tab, and then select Connections
.
4.
On the Tasks tab, select Add a new VPN server connection.
5.
Follow the onscreen instructions for entering the settings provided by your corporate
system administrator.
Setting Up a Proxy Server
1.
Press Start
and
select
Settings.
2.
Select the Connections tab, and then select Connections
.
3.
On the Tasks tab, select Set up my proxy server.
Before You
Begin
Check with your company’s system administrator to see if a VPN is required
for accessing the corporate network. If you need a VPN, you must purchase
and install a third-party VPN client in order to use this feature. Before you
begin setting up a VPN, ask your system administrator for the following
information:
•
Your username and password.
•
Your server’s domain name.
•
Your server’s TCP/IP settings.
•
Your server’s host name or IP address.
Did you know?
A common cause of sync problems is the presence of protective software,
such as VPNs or firewalls, on your computer or network. See “The Desktop
Sync Software Does Not Respond to a Sync Attempt” on page 360.
Tip
To manually start a data connection on the Sprint network or another
network, go to
Connections Settings.
On the
Tasks
tab, select
Manage
existing connections.
Tap and hold the connection you want to start, and
then select
Connect
from the shortcut menu.