Siemens S5-135U/155U - Manual (Page 508)

10-12
System Manual
C79000-G8576-C199-06
10.3.2 Setting the Address Switches S1, S2, S3, S4
The addresses are set as one-byte addresses as in the case of I/O modules.
ADB 7 Significance 128
ADB 0 Significance 1
ADB 5 Significance 32
ADB 6 Significance 64
ADB 4 Significance 16
ADB 1 Significance 2
ADB 2 Significance 4
ADB 3 Significance 8
1 2 3 4 5 6 7 8
ON
OFF
The significance of the rockers pressed down to ON at the switches must be
added.
Address 85 is to be set.
rockers to be pressed down to ON Significance
1 (ADB 0) 1
3 (ADB 2) 4
5 (ADB 4) 16
7 (ADB 6) 64
85
1 2 3 4 5 6 7 8
ON
OFF
Example
Monitoring Module