IDEC FS1A Controller - Manual (Page 13)

PRODUCT SPECIFICATIONS
2-1
Chapter 2
Chapter2 PRODUCT SPECIFICATIONS
This chapter describes product specifications of the SafetyOne.
Parts Description
The protective cover is closed The protective cover is open
1. Protective cover: The cover protects unauthorized changing of configuration switches.
2. Input connector: Spring clamp connector for input devices. (Crimp connector can also be used.)
3. Output connector: Spring clamp connector for output devices and power supply.
(Crimp connector can also be used)
4. Logic LED: The 7-segment green LED indicates the number of logic pattern selected.
5. Error LED: The 7-segment red LED indicates an error in the SafetyOne and peripherals.
6. Timer LED: The eight Timer LEDs indicate the selected timer value.
7. Input/output status LED: The input LEDs indicate the state of inputs.
The output LEDs indicate the state of outputs.
z SAFE-IN: Status of safe inputs, e.g. X0 … X15
z START-IN: Status of start inputs, e.g. X16, 17
z SAFE-OUT: Status of safe outputs, e.g. Y0 … Y3
z SOLENOID-OUT: Status of solenoid outputs, e.g. Y17, 20
8. Logic switch: DIP switch for selecting the internal logic.
9. Timer switch: DIP switch for selecting the OFF-delay time for the safe output.
10. Enter button: button for activation of parameter changes.
11. Locking ring: ring for locking the protective cover