Selecting the universal print settings – Epson WorkForce Pro WF-C5890 Wireless Color MFP Inkjet Printer User Manual
Page 96
96
Paper Source
Settings option
Available settings
Description
Auto Select
Settings
Copy
Fax
Other
Select
On
for a paper source to allow the printer to
automatically print on paper from that source if it matches
your paper settings. You can set automatic selection for
each function separately. If a paper source is specified
during a print job, this setting will be ignored.
Automatic
Selection at
Paper Out : For
Copy
On
Off
Select
On
to enable switching to another paper source if
paper runs out during copying. Both the chosen paper
source and the alternate paper source must be enabled in
the
Auto Select Settings
setting.
Error Notice
Paper Size Notice
Select
On
for either of these settings to display an error
message when the selected paper type or size does not
match the loaded paper
Paper Type Notice
Paper Setup
Auto Display
On
Select
On
to automatically display a menu that lets you
select the paper size and type when you load paper in the
product
Note:
If you turn this setting off, you cannot use AirPrint.
Off
Parent topic:
Selecting the Default Printer Settings
Selecting the Universal Print Settings
You can change the default universal print settings using the control panel on the product.
Note:
These settings can be locked by an administrator. If you cannot access these settings, contact
your administrator for assistance.
1. Press the
home button, if necessary.
2. Select
Settings
>
General Settings
>
Printer Settings
>
Universal Print Settings
.
3. Adjust the settings as necessary.
4. When you are finished, press the
home button to exit.
Universal Print Settings Options
Parent topic: