Epson WorkForce Pro WF-C5890 Wireless Color MFP Inkjet Printer User Manual
Page 328
328
Setting
Options/Description
Remote Address(Host)
Enter the device's IP address (between 0 and 43
characters long) to control access, or leave blank to
control all addresses; if the IP address is assigned
automatically, such as by DHCP, the connection may be
unavailable, so configure a static address instead
Method of Choosing Port
Select the method you want to used for specifying ports
Service Name
If you selected
Service Name
as the
Method of
Choosing Port
option, select a service name option here;
see the next table for more information
Transport Protocol
If you selected
Port Number
as the
Method of Choosing
Port
option, select one of these encapsulation modes:
Any Protocol
TCP
UDP
ICMPv4
See the Group Policy Guidelines table for more
information.
Local Port
If you selected
Port Number
as the
Method of Choosing
Port
option, and
TCP
or
UDP
for the
Transport Protocol
option, enter the port numbers that control receiving
packets (up to 10 ports), separated by commas, for
example
25,80,143,5220
; leave this setting blank to
control all ports; see the next table for more information
Remote Port
If you selected
Port Number
as the
Method of Choosing
Port
option, and
TCP
or
UDP
for the
Transport Protocol
option, enter the port numbers that control sending
packets (up to 10 ports), separated by commas, for
example
25,80,143,5220
; leave this setting blank to
control all ports; see the next table for more information
Authentication Method
If you selected
IPsec
as the
Access Control
option,
select an authentication method here