Epson WorkForce Pro WF-C5890 Wireless Color MFP Inkjet Printer - Manual (Page 61)

61
3. Select Router .
4. Select Change Settings , if necessary.
5. Select Push Button Setup (WPS) .
6. Follow the instructions on the LCD screen to complete WPS setup.
7. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the
Start Here sheet.
Note: If you don't see the icon, repeat these steps to try again.
Parent topic: Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Network Settings > Network Status > Print Status Sheet .
3. Select Print .
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic: Wi-Fi or Wired Networking
Printing a Network Connection Report
You can print a network connection report to view solutions to any problems you may have using your
product on a network.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Network Settings > Connection Check .
3. Select Print Check Report .
Note: Select OK to return to the Network Settings menu without printing a report.
4. Select Print .