Adjusting power saving settings – Epson WorkForce Pro WF-C5890 Wireless Color MFP Inkjet Printer User Manual
Page 308
308
3. Set the contents of the email subject line by selecting items from the drop-down menus.
Note:
You cannot select the same item in both menus. If the Location setting is longer than 32 bytes,
it will be truncated in the Subject line.
4. Enter up to five email addresses to receive the notification emails, and select the language of the
notification email.
5. In the Notification Settings area, select one or more email addresses to receive a notification for
each event.
6. Click
OK
to apply the settings.
Note:
To clear the email notification settings, select
Restore Default Settings
. This clears all email
notification settings, not just the changes made in the current session.
Parent topic:
Related tasks
Accessing the Web Config Utility
Adjusting Power Saving Settings
The product can automatically enter sleep mode or turn off after it has not been used for a while. You
can set the delay before the product enters sleep mode or turns off.
1. Log in to the Web Config interface as an administrator.
2. Select the
Device Management
tab, then select the
Power Saving
setting.
3. Set
Sleep Mode
to the number of minutes before the product enters a low-power mode.
4. Select
Power Off Timer
to set the amount to time of inactivity before the product turns off.
Note:
If you are using the fax feature, select
None
.
Note:
You can also configure the power saving settings using the control panel by selecting
Settings
>
General Settings
>
Basic Settings
and selecting the feature you want to change.
Parent topic:
Related tasks
Accessing the Web Config Utility
Changing the Sleep Timer Settings