beautypg.com

Epson WorkForce Pro WF-C5890 Wireless Color MFP Inkjet Printer User Manual

Page 345

background image

345

LCD screen message

Condition/solution

You need to replace Ink Supply
Unit(s).

Replace the indicated ink packs.

Paper Setup Auto Display is set to
Off. Some features may not be
available. For details, see your
documentation.

AirPrint is not available when the

Paper Setup Auto Display

setting is disabled. Change

Paper Setup Auto Display

to

On

.

No dial tone is detected.

Make sure the phone cable is connected correctly and the
phone line works. If you connected the product to a PBX (Private
Branch Exchange) phone line or Terminal Adapter, change the

Line Type

setting to

PBX

. If you still cannot send a fax, turn off

the

Dial Tone Detection

setting. (Turning off the Dial Tone

Detection setting may cause the product to drop the first digit of
a fax number.)

Failed to receive faxes because the
fax data capacity is full. Touch the
Job/Status at the bottom of the Home
Screen for details.

Press the

Job/Status

button and select

Printer Status

and

resolve any printer errors that prevented faxes from printing.
Make sure the product is connected to a computer or that a USB
device is connected to the product.

The combination of the IP address
and the subnet mask is invalid. See
your documentation for more details.

There is a problem with the network connection to your product.
Set up your product on the network again.

To use cloud services, update the
root certificate from the Epson Web
Config utility.

Access the Web Config utility and update the cloud service root
certificate.

Check that the printer driver is
installed on the computer and that
the port settings for the printer are
correct.

Make sure the printer port is correctly configured. In Windows,
make sure the port is set to a

USBXXX

setting for a USB

connection or

EpsonNet Print Port

for a network connection.

Recovery Mode

Update Firmware

An error has occurred during firmware updating. Connect your
product using a USB cable and try downloading the Firmware
Update from the Epson support site. If you still need help,
contact Epson for support.

Parent topic:

Solving Problems

Related references

Paper Source Settings Options

This manual is related to the following products: