Epson WorkForce Pro WF-C5890 Wireless Color MFP Inkjet Printer - Manual (Page 332)

332
• Pre-Shared Key : Enter a key up to 127 characters long
Receiving Printing Data and Printer Settings
Use this example to allow communication of printing data and printer settings from specified services.
Default policy:
• IPsec/IP Filtering : Enable
• Access Control : Refuse Access
Group policy:
• Access Control : Permit Access
• Remote Address(Host) : Client IP address
• Method of Choosing Port : Service Name
• Service Name : Select ENPC , SNMP , HTTP (Local) , HTTPS (Local) , and RAW (Port9100)
Receiving Access from Only a Specified Address for Product Access
In these examples, the client will be able to access and configure the product in any policy configuration.
Default policy:
• IPsec/IP Filtering : Enable
• Access Control : Refuse Access
Group policy:
• Access Control : Permit Access
• Remote Address (Host) : Administrator's client IP address
Parent topic: Configuring IPsec/IP Filtering
Configuring an IPsec/IP Filtering Certificate
You can configure a certificate for IPsec/IP traffic filtering using Web Config.
1. Access Web Config and select the Network Security tab.
2. Under IPsec/IP Filtering , select Client Certificate .
3. Click Import to add a new client certificate and enter any necessary settings.
4. Click OK .
Parent topic: Configuring IPsec/IP Filtering