1 start here – ProSoft Technology MVI56-104S User Manual
Page 9
Start Here
MVI56-104S ♦ ControlLogix Platform
User Manual
IEC 60870-5-104 Server Communication Module
ProSoft Technology, Inc.
Page 9 of 188
November 18, 2009
1 Start
Here
In This Chapter
System Requirements.......................................................................... 9
Package Contents ............................................................................. 10
Install ProSoft Configuration Builder Software..................................... 11
Setting Jumpers................................................................................. 12
Install the Module in the Rack ............................................................ 13
Connect your PC to the ControlLogix Processor ................................. 14
Open the Sample Ladder Logic .......................................................... 15
Download the Sample Program to the Processor ................................ 20
Connect your PC to the Module.......................................................... 21
To get the most benefit from this User Manual, you should have the following
skills:
Rockwell Automation
®
RSLogix™ software: launch the program, configure
ladder logic, and transfer the ladder logic to the processor
Microsoft Windows: install and launch programs, execute menu commands,
navigate dialog boxes, and enter data.
Hardware installation and wiring: install the module, and safely connect
104 and ControlLogix devices to a power source and to the MVI56-104S
module’s application port(s).
Caution: You must be able to complete the application without exposing personnel or
equipment to unsafe or inappropriate working conditions.
1.1 System
Requirements
The MVI56-104S module requires the following minimum hardware and software
components:
Rockwell Automation ControlLogix™ processor, with compatible power
supply and one free slot in the rack, for the MVI56-104S module. The module
requires 800mA of available power.
Rockwell Automation RSLogix 5000 programming software version 2.51 or
higher.
Rockwell Automation RSLinx communication software