ProSoft Technology MVI56-104S User Manual
Page 82
MVI56-104S ♦ ControlLogix Platform
Diagnostics and Troubleshooting
IEC 60870-5-104 Server Communication Module
User Manual
Page 82 of 188
ProSoft Technology, Inc.
November 18, 2009
Viewing Block Transfer Statistics
Press [B]
from the Main Menu to view the Block Transfer Statistics screen.
Use this command to display the configuration and statistics of the backplane
data transfer operations between the module and the processor. The information
on this screen can help determine if there are communication problems between
the processor and the module.
Tip: To determine the number of blocks transferred each second, mark the numbers displayed at a
specific time. Then some seconds later activate the command again. Subtract the previous
numbers from the current numbers and divide by the quantity of seconds passed between the two
readings.
Viewing Module Configuration
Press [C]
to view the Module Configuration screen.
Use this command to display the current configuration and statistics for the
module.
Opening the Database Menu
Press [D]
to open the Database View menu. Use this menu command to view the
current contents of the module’s database.
Opening the IEC-870-5-104 Server Menu
Press [I]
to open the IEC-870-5-104 Server Menu. Use this command to view all
data associated with the IEC-870-5-104 server driver.
Viewing SNTP Status
Press [N]
to view configuration information about the SNTP client.
Refer to SNTP Support for more information on configuring and using this
function.