ProSoft Technology MVI56-104S - Manual (Page 154)

MVI56-104S ♦ ControlLogix Platform Reference
IEC 60870-5-104 Server Communication Module User Manual
Page 154 of 188
ProSoft Technology, Inc.
November 18, 2009
Ethernet Port Configuration - wattcp.cfg
The wattcp.cfg file must be set up properly in order to use a TCP/IP network
connection. You can view the current network configuration using an ASCII
terminal by selecting [@]
(Network Menu) and [V] (View) options when
connected to the Debug port.
5.5.2 RS-232 Configuration/Debug Port
This port is physically an RJ45 connection. An RJ45 to DB-9 adapter cable is
included with the module. This port permits a PC based terminal emulation
program to view configuration and status data in the module and to control the
module. The cable for communications on this port is shown in the following
diagram: