ProSoft Technology MVI56-104S - Manual (Page 84)

MVI56-104S ♦ ControlLogix Platform Diagnostics and Troubleshooting
IEC 60870-5-104 Server Communication Module User Manual
Page 84 of 188
ProSoft Technology, Inc.
November 18, 2009
Exiting the Program
Caution: Some of the commands available to you from this menu are designed for advanced
debugging and system testing only, and can cause the module to stop communicating with the
processor or with other devices, resulting in potential data loss or other failures. Only use these
commands if you are specifically directed to do so by ProSoft Technology Technical Support staff.
Some of these command keys are not listed on the menu, but are active nevertheless. Please be
careful when pressing keys so that you do not accidentally execute an unwanted command.
Press [E SC ] to restart the module and force all drivers to be loaded. The module
will use the configuration stored in the module's Flash memory to configure the
module.
4.1.4 Database View Menu
Press [D] from the Main Menu to open the Database View menu. Use this menu
command to view the current contents of the module’s database. Press [?] to
view a list of commands available on this menu.
M = Main Menu
D = Database Menu
P = Previous Page
– = Back 5 Pages
0 – 3 = Pages 0 to 3000
F = Float Display
D = Decimal Display
H = Hexadecimal Display
N = Next Page
+ = Skip 5 Pages
A = ASCII Display
M = Main Menu Goes up one level to main menu
Goes back one page of data
Goes back five pages of data
Selects page 0, 1000, 2000 or 3000
Displays data in decimal format
Goes forward one page of data
Goes forward five pages of data
Displays data in text format
Displays data in floating point format
Displays data in hex format
S = Show Again Redisplays last selected page of data
? = Display Menu Redisplays (refreshes) this menu