ProSoft Technology MVI56-104S - Manual (Page 19)

Start Here MVI56-104S ♦ ControlLogix Platform
User Manual IEC 60870-5-104 Server Communication Module
ProSoft Technology, Inc.
Page 19 of 188
November 18, 2009
3 Click to select the driver, and then click C ONFIGURE . This action opens the
C ONFIGURE RS-232 DF1 D EVICE dialog box.
4 Click the A UTO -C ONFIGURE button. RSLinx will attempt to configure your
serial port to work with the selected driver.
5 When you see the message A UTO C ONFIGURATION S UCCESSFUL , click the OK
button to dismiss the dialog box.
Note: If the auto-configuration procedure fails, verify that the cables are connected correctly
between the processor and the serial port on your computer, and then try again. If you are still
unable to auto-configure the port, refer to your RSLinx documentation for further troubleshooting
steps.