ProSoft Technology MVI56-104S - Manual (Page 20)

MVI56-104S ♦ ControlLogix Platform Start Here
IEC 60870-5-104 Server Communication Module User Manual
Page 20 of 188
ProSoft Technology, Inc.
November 18, 2009
1.8 Download the Sample Program to the Processor
Note: The key switch on the front of the ControlLogix processor must be in the REM or PROG
position.
1 If you are not already online with the processor, open the C OMMUNICATIONS
menu, and then choose D OWNLOAD . RSLogix will establish communication
with the processor. You do not have to download through the processor's
serial port, as shown here. You may download through any available network
connection.
2 When communication is established, RSLogix will open a confirmation dialog
box. Click the D OWNLOAD button to transfer the sample program to the
processor.
3 RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.
4 When the download is complete, RSLogix will open another confirmation
dialog box. If the key switch is in the REM position, click OK to switch the
processor from P ROGRAM mode to R UN mode.
Note: If you receive an error message during these steps, refer to your RSLogix documentation to
interpret and correct the error.