ProSoft Technology MVI56-104S - Manual (Page 166)

MVI56-104S ♦ ControlLogix Platform Reference
IEC 60870-5-104 Server Communication Module User Manual
Page 166 of 188
ProSoft Technology, Inc.
November 18, 2009
Clock synchronization
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧ Clock synchronization
Optional
Command transmission
(Object-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
⌧ Direct command transmission
⌧
Direct set point command transmission
⌧ Select and execute command
⌧ Select and execute set point command
⌧ C_SE_ACTTERM used
note 2
⌧ No additional definition
⌧ Short pulse duration (duration determined by a system parameter in the
outstation)
⌧ Long pulse duration (duration determined by a system parameter in the
outstation)
⌧ Persistent output
Supervision of maximum delay in command direction of commands and
set point commands
Maximum allowable delay of commands and set point commands