ProSoft Technology MVI56-104S - Manual (Page 38)

MVI56-104S ♦ ControlLogix Platform Configuring the MVI56-104S Module
IEC 60870-5-104 Server Communication Module User Manual
Page 38 of 188
ProSoft Technology, Inc.
November 18, 2009
2.4.23 Scan Events
Scan for Events
No Scanning
Defines whether events of this point type will be generated by the module. If "No
Scanning", then events will not be generated. If "Scan for events", events will be
scanned and generated on change.
2.4.24 Time Type
None, CP24 or CP56
This parameter defines the time format used with data events. 0=None, 1=CP24
and 2=CP56 time formats.
2.5 [IEC-870-5-104 IP Addresses]
This section enters the IP addresses for the hosts to connect to this unit. The unit
will only accept connections from hosts listed here. This list may contain up to 10
entries between the START and END labels. The address must start in column 1,
and must be entered in standard dot notation.
The following is an example of the [IEC-870-5-104 IP Addresses] section: