ProSoft Technology MVI56-104S - Manual (Page 51)

Configuring the MVI56-104S Module MVI56-104S ♦ ControlLogix Platform
User Manual IEC 60870-5-104 Server Communication Module
ProSoft Technology, Inc.
Page 51 of 188
November 18, 2009
2.22 Download the Project to the Module
In order for the module to use the settings you configured, you must download
(copy) the updated Project file from your PC to the module.
To Download the Project File
1 In the tree view in ProSoft Configuration Builder, click once to select the
MVI56-104S module.
2 Open the P ROJECT menu, and then choose M ODULE / D OWNLOAD . The
program will scan your PC for a valid com port (this may take a few seconds).
When PCB has found a valid com port, the D
OWNLOAD dialog box will open.
3 Choose the com port to use from the dropdown list, and then click the
D OWNLOAD button.
The module will perform a platform check to read and load its new settings.
When the platform check is complete, the status bar in the D
OWNLOAD dialog
box with the message "Module Running".