ProSoft Technology MVI56-104S - Manual (Page 162)

MVI56-104S ♦ ControlLogix Platform Reference
IEC 60870-5-104 Server Communication Module User Manual
Page 162 of 188
ProSoft Technology, Inc.
November 18, 2009
System information in control direction
(Station-specific parameter, mark each Type ID 'X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)
⌧ <100> := Interrogation command C_IC_NA_1
⌧ <101> := Counter interrogation command C_CI_NA_1
⌧ <102> := Read command C_RD_NA_1
⌧ <103> := Clock synchronization command C_CS_NA_1
⌧ <105> := Reset process command C_RP_NC_1
⌧ <107> := Test command with time tag CP56Time2a C_TS_TA_1
Parameter in control direction
(Station-specific parameter, mark each Type ID 'X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)
⌧ <110> := Parameter of measured value, normalized value P_ME_NA_1
⌧ <111> := Parameter of measured value, scaled value P_ME_NB_1
⌧ <112> := Parameter of measured value, short floating point value
P_ME_NC_1
<113> := Parameter activation P_AC_NA_1
File transfer
(Station-specific parameter, mark each Type ID "X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)
<120> := File ready F_FR_NA_1
<121> := Section ready F_SR_NA_1
<122> := Call directory, select file, call file, call section F_SC_NA_1
<123> := Last section, last segment F_LS_NA_1
<124> := Ack file, ack section F_AF_NA_1
<125> := Segment F_SG_NA_1
<126> := Directory F_DR_TA_1