TA Triumph-Adler DCC 2520 - Manual (Page 323)

Job Accounting
8-23
3 The department ID entry screen is
displayed. Use the numeric keys to enter
the department ID and press [Enter].
The screen for the each function is
displayed.
NOTE: If you enter the code incorrectly, press [Clear] to reenter the correct code.
Entering an invalid department ID-code will trigger an error alarm. Use the numeric keys to enter the
correct code.
You can review the department’s copy count by pressing [Each Mgt. Total] after entering your
department ID-code.
4 Complete the scan job as usual.
5 After finishing scanning, the touch panel will return to the screen in step 1. The department ID code
must be reentered for the next scan operation.
D.
Enter
Clear
Each Mgt.
Total