TA Triumph-Adler DCC 2520 - Manual (Page 159)

Scanner Settings
4-17
Auto Center
Configure Auto Center for default settings mode. The setting items are as follows.
For further details about Auto Center, see page 4-9.
1 Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default
function screen.
2 Press [S] or [T] to select Auto Center (Image shift) and press [Change #].
3 Select [On] or [Off].
4 Press [Close]. The display returns to the Setting default function screen.
Continuous Scanning
Use the same settings from a previously completed transmission for the next transmission. The
scan function screen is returned with the sender (user), destination and other settings remaining
from the previous operation.
NOTE: To switch to continuous scan
from the scanner function screen, press
[Cont. TX to]. When continuous scan is
enabled, [Cont. TX to] changes to
[Single Scan]. To enable Single Scan,
press [Single Scan].
If Permit File Overwrite is checked in
Scanner File Utility (see page 6-7), files
with already existing names will be
overwritten. Exercise caution when
inputting file names during Continuous Scan mode.
When finished using Continuous Scan, always [Cancel] on the scanner function screen. If not
pressed, the scanner function screen may remain active, rendering the copy, print or fax functions
unusable. Also, exercise caution as unauthorized users may obtain access to the device while this
screen is displayed.
1 Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default
function screen.
2 Press [S] or [T] to select Continuous Sending and press [Change #].
3 Select [On] or [Off].
4 Press [Close]. The display returns to the Setting default function screen.
Item Description
On Enables Auto Center.
Off Disables Auto Center.
Item Description
On Enables Continuous Scan.
Off Disables Continuous Scan.
Place the original and select destination.
Scan to PC-Sending
Destination
Original
11×8½"
Address
Select
Auto
Scanning
Basic Quality
Auto size
Select
Send Size
Top Edge
Orig. Set
08/0
Book
Orig.Size Direction
Resolution
Ready to scan. ( ) Full-Color
Cont. TX to Register Prgrm
200dpi
Save at
User PC
Delete