TA Triumph-Adler DCC 2520 - Manual (Page 18)

Copy Functions
1-2
Selecting Paper Source
To select paper of different sizes, change the cassette or MP tray paper source.
Follow the steps as below to select the paper source.
1 Place the original.
When [APS] is selected, paper matching
the size of the original will be selected
automatically.
NOTE: You may override the automatic
paper selection default. For further
details, refer to Setting Auto Paper
Selection on page 7-6.
2 To change the paper size, press the button corresponding to the desired paper size to select that
paper source.
When using the MP tray, refer to Chapter 2 of Operation Guide: Setting Paper Type and Size for the
Cassettes and MP Tray to set the paper size and paper type.
3 Press the Start key. Copying begins.
Paper Size
Color func. Function User choice Basic
Plain
11×17"
Color
11×8½"
Plain
11×8½"
Plain
MP tray
Plain
APS Auto %
Reduce
100%
Exposure
Auto
Staple
Staple
Left Top
Staple Off
100%
Exposure
/Enlarge Mode
Program
Ready to copy. ( ) Full-Color
11Ч8
11Ч8½"