TA Triumph-Adler DCC 2520 - Manual (Page 119)

Printer Settings
3-25
4 Press [S] or [T] to select Duplex Mode
and press [Change #].
5 Press [Off], [Short edge bind] or [Long edge bind].
6 Press [Close]. The display returns to the Paper Handling screen.
7 Press [Close]. The display is returned to the Printer menu screen.
Paper Output Select
Set the output destination for printed paper. If the optional document finisher or 3000 sheet
document finisher, or mailbox is installed, you can specify each tray.
1 Press the Printer key.
2 Press [Printer Menu].
3 Press [Paper Handling].
4 Press [S] or [T] to select Paper Output
and press [Change #].
5 Press the desired output destination key.
6 Press [Close]. The display returns to the Paper Handling screen.
Paper Handling
Printer menu
(Not specified)
Change #
Setting Item
Duplex Mode
Paper Output
Override A4/LT
Value
Multipurpose tray mode Cassette
Off
Tray A
Off
Feed Select 1st paper
Paper Output Description
Top tray Outputs to the built-in output tray.
Job separator Outputs to the optional job separator.
Finisher tray Outputs to the optional document finisher tray.
Tray A Outputs to Tray A of the optional 3000 sheet document finisher.
Tray B Outputs to Tray B of the optional 3000 sheet document finisher.
Tray C Outputs to Tray C of the optional 3000 sheet document finisher.
Tray 1 - 7 Outputs to Trays 1 - 7 (1 is the uppermost tray) of the optional mailbox.
Printer menu
Print Sta-
tus Page
Interface
Emulation
Page Set
Print
Paper
RAM DISK
Mode
Select item.
Font
Color Mode
Handling
Quality
Others
Paper Handling
Printer menu
(Not specified)
Change #
Setting Item
Paper Output
Override A4/LT
Value
Multipurpose tray mode Cassette
Tray A
Off
Feed Select 1st paper
Duplex Mode Off