TA Triumph-Adler DCC 2520 - Manual (Page 270)

System Menu
7-22
Selecting Output Destination
Set the default copy output destination.
NOTE: This setting is displayed when the optional job separator, document finisher or 3000 sheet
document finisher is installed.
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [S] or [T] to select Select Copy output mode and press [Change #].
3 Select the output destination.
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Selecting FAX Output Mode
Set the default output destination for printing originals or reports received by fax.
NOTE: This setting is displayed when the fax kit and optional job separator, document finisher or
3000 sheet document finisher is installed.
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [S] or [T] to select Select FAX output mode and press [Change #].
3 Select the output destination.
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Paper Output Description
Top tray Outputs to the built-in output tray.
Job separator Outputs to the optional job separator.
Finisher tray Outputs to the optional document finisher tray.
Tray A Outputs to Tray A of the optional 3000 sheet document finisher.
Tray B Outputs to Tray B of the optional 3000 sheet document finisher.
Tray C Outputs to Tray C of the optional 3000 sheet document finisher.
Tray 1 - 7 Outputs to Trays 1 - 7 (1 is the uppermost tray) of the optional mailbox.
Paper Output Description
Top tray Outputs to the built-in output tray.
Job separator Outputs to the optional job separator.
Finisher tray Outputs to the optional document finisher tray.
Tray B Outputs to Tray B of the optional 3000 sheet document finisher.
Tray 1 - 7 Outputs to Trays 1 - 7 (1 is the uppermost tray) of the optional mailbox.