TA Triumph-Adler DCC 2520 - Manual (Page 171)

Setting Scanner from a Web Browser
5-5
Menu Frame
From the menu frame, select the desired configuration items for the scanner.
NOTE: Each item in the menu frame can be configured in succession. However, if the same item is
selected during configuration, settings made until then are lost.
Main Frame
Displays the scanner system information. You can also change the display language.
NOTE: When launched, the default values are shown.
Display Description
Home Select Home to return the browser to the top page for accessing the scanner.
System Setting System Setting is used to configure scanner related settings, and contains
the following items.
• System Basic Setting: Configure settings related to the scanner's
network interface.
• Scanner Default Setting: Configure default values for main scanner
functions.
• Sender List: Configure the Sender (User) List for use with scanner
functions (Send E-mail, Scan to PC, Database Connection, Scan to FTP).
• Reset: Reset the scanner or restore settings to their factory default
settings.
“Send E-mail”
Setting “Send E-mail” Setting is used to configure basic settings required for Send
E-mail.
• E-mail Basic Setting: Configure basic items related to Send E-mail.
• Destination List: Register addresses for e-mail destinations.
“Scan to PC”
Setting Use “Scan to PC” Setting to configure various settings for sending files to a
computer (PC) for saving.
• Destination List: Register addresses for destination computers (PCs).
“Scan to FTP”
Setting “Scan to FTP” Setting is used to configure various settings for transferring
files to FTP servers.
• Destination List: Register FTP servers or other settings.
Display Description
Scanner Status
Information When the top page scanner status changes to z OTHER, click the
Refresh button to verify the status of the system. When the scanner
status is
z OK, Ready to Scan is displayed.
The following 6 status results can be obtained from the scanner device.
Ready to Scan/Using Scanner/DP (Document Processor) Paper
Jam/System Error/Processing/Energy Save Mode
Ethernet Address The scanner’s MAC address will be displayed.
Scanner Firmware The scanner’s firmware version will be displayed.
Network Firmware The scanner’s network firmware version will be displayed.
Color Profile The color profile filename compatible with this device will be displayed.
Language You can switch the language shown in the Web Page.