TA Triumph-Adler DCC 2520 - Manual (Page 192)

Setting Scanner from a Web Browser
5-26
Destination Registration (FTP)
Add or edit an FTP server.
Setting Item Description
Registration Number The number selected from the Destination List is shown here. This is
shown for to verify which number from the Destination Registration
(FTP) Table is being added or modified, and cannot be modified itself.
Registration Name Field to enter the Registration Name. When a name is entered here, it
is shown in the Destination PC Registration table and on the scanner
device operation panel. Enter a registration name less than 16
characters long.
FTP Server Enter the hostname or IP address for the FTP server. Enter the
hostname using less than 64 characters.
Port Number Enter the port number for the FTP server. (Usually 21)
Path Enter the path to the folder to which you wish to upload. For example,
to save to a ScanData folder in the home directory, input ScanData.
Data will be saved to the home directory if nothing is input.
Skip Authentication If set to Yes, users are not prompted for username and password
when sending. If set to Yes, register the login account name and
password as below.
Login Account Name Input the user name to logon to the FTP server.
Change Password Set to Yes to change the password used to logon to the FTP server or
No to leave as-is.
New Password To change the password, enter the new password using less than 32
characters.
Confirm New Password For verification, re-enter the same password as in the New Password
field above.
Registration Button Click the Registration button to save the settings to the scanner.
Entered data is lost if this button is not clicked.
Reset Button Click the Reset button to reset any changes to the setting options.
Delete Button Click the Delete button to delete the displayed destination.