TA Triumph-Adler DCC 2520 - Manual (Page 278)

System Menu
7-30
Registering Non-standard Sizes for Originals
Pre-register 4 types of non-standard original sizes. Registered sizes are shown as custom sizes
when selecting the original size.
The size range that can be registered is as follows.
1 Press the System Menu/Counter key.
2 Press [Register Orig. Size].
3 Select the number to register from Original Size (custom 1 - 4) and press [Change #].
4 Press [Set].
5 Press [+] or [–] to set the Y (height) and X (width) sizes.
6 Press [Close] to save settings or [Back] to cancel settings.
7 Press [Close]. The display is returned to the System Menu screen.
Model Type Range
Inch models Height: 2 - 11
5/8
" (1/8" increments)
Width: 2 - 17" (1/8" increments)
Metric models Height: 50 - 297 mm (1 mm increments)
Width: 50 - 432 mm (1 mm increments)
System Menu / Counter
System Menu
Default
Copy
Language
Accounting
Job
Default
Scanner
Default
Machine
Default
Printer
Setting
MP tray
Management
BOX
Management
Document
Orig. Size
Register
Report
Print