TA Triumph-Adler DCC 2520 - Manual (Page 317)

Job Accounting
8-17
Job Accounting Default Settings
Changes the defaults for Job Accounting.
The following items can be configured for Job Accounting default settings.
• Copy Job Accounting...8-17
• Printer Job Accounting...8-17
• Printer Error Report...8-18
• Printing from Unregistered Sources (Printer)...8-18
• Copy/Printer Output Management...8-19
• Scanner Job Accounting...8-19
• Fax Job Accounting...8-20
• Response to Unauthorized Requests...8-20
• Default Counter Limit Value...8-20
• Total Count by Size, 1-5...8-21
Copy Job Accounting
Activate or deactivate Job Accounting for copy jobs. The setting items are as follows.
1 Referring to Accessing the Job Accounting Screen on page 8-3, access the Job Accounting screen.
2 Press [Job Accntg Def. Set.].
3 Press [S] or [T] to select Copy Job Accounting and press [Change #].
4 Select [On] or [Off].
5 Press [Close] to save settings or [Back] to cancel settings.
6 Press [Close]. The touch panel will return to the Job Accounting screen.
Printer Job Accounting
Activate or deactivate Job Accounting when the device is used as a printer. The setting items are as
follows.
1 Referring to Accessing the Job Accounting Screen on page 8-3, access the Job Accounting screen.
Setting Description
Off Copy Job Accounting is deactivated.
On Copy Job Accounting is activated.
Job Accounting
Each Mgt.
Job Accountg T Register/Sett.
Management Management Job Accntg
Def. Set.
System Menu
Total Total Edit
Setting Description
Off Printer Job Accounting is deactivated.
On Printer Job Accounting is activated.