TA Triumph-Adler DCC 2520 - Manual (Page 130)

Printer Settings
3-36
4 Press [S] or [T] to select the user and
press [Next].
5 Press [S] or [T] to select the job and
press [Next].
NOTE: Select the job and press
[Delete] to delete the selected job.
6 Press [+] , [–] or numeric keys to set number of copies.
7 Press [Printing].
If access code has been enabled, Enter
ID-code is displayed.
Use the numeric keys to input the 4 digit
access code configured at the printer
driver and press [Enter].
Processing message is displayed and
printing begins.
8 When printing is complete, the screen returns to printer mode.
name. Cancel
Next
Up User
Down
Cancel
Next
Up Job
Down
Delete
Enter ID-code
Clear
(with #key)
Job name:List 1