Printer settings 3-7 1 – TA Triumph-Adler DCC 2520 User Manual
Page 101

Printer Settings
3-7
1
Press the Printer key.
2
Press [Printer Menu].
3
Press [Interface].
4
Press [Network].
NOTE: To set the optional network interface, press [Option].
5
Press [S] or [T] to select TCP/IP and
press [Change #].
6
Press [On].
7
Press [S] or [T] to select DHCP and press [Change #].
8
Press [On] or [Off] and press [Close].
9
Press [S] or [T] to select BOOTP and press [Change #].
10
Press [On] or [Off] and press [Close].
11
Press [S] or [T] to select IP Address and press [Change #].
12
Enter the IP address using the numeric
keys. Input the address for the 3 digits
displayed in reverse black and white and
press the # key.
13
Input the address for the next 3 digits displayed in reverse black and white and press the # key.
To correct an address entry, press the # key to select the 3 digit address you would like to correct
and reenter the address using the numeric keys.
14
After inputting the rest of the address in the same manner, press [Close]. The display returns to the
TCP/IP Settings screen.
Press [Back] to reset the entered address and set the previous address.
Printer menu
Print Sta-
tus Page
Interface
Emulation
Page Set
Paper
RAM DISK
Mode
Select item.
Font
Color Mode
Handling
Quality
Others
Interface
NetWare
Parallel
Network
Change #
Setting Item
Value
On
TCP/IP
On
Ethertalk
On
Network Status Page
Off
USB
Printer menu
IP Address
.
10
(with #key)
Back
Printer menu- Interface - Network
- TCP/IP
.
0
.
0
.
0
Confirm per 3 lines pressing # key.