TA Triumph-Adler DCC 2520 - Manual (Page 126)

Printer Settings
3-32
3 Press [RAM DISK Mode].
4 Press [On].
5 Press [Close].
Restart now? message is displayed.
6 Press [Yes]. This device restarts. RAM Disk mode is set to [On] (enabled).
RAM Disk Size Setting
Specify the amount of memory from this device total memory to allocate to the RAM disk. Enabling
this function allows the use of electronic sorting and decreasing total printing time.
The maximum size that can be allocated is the amount of total memory minus 36 MB. For instance,
if 512 MB of extended memory as been installed, the total memory is 768 MB (including 256 MB
installed at the factory), so the maximum RAM disk size is 768 MB minus 36 MB, or 732 MB.
NOTE: Set the RAM Disk data size after setting RAM Disk mode to [On].
1 Press the Printer key.
2 Press [Printer Menu].
3 Press [RAM DISK Mode].
4 Press [RAM Disk Size].
5 Press [+] or [–] to set the RAM Disk size.
6 Press [Close]. If the memory size has been changed, Do you want to restart immediately? message
is displayed.
Printer menu
Print Sta-
tus Page
Interface
Emulation
Page Set
Print
Paper
RAM DISK
Mode
Select item.
Font
Color Mode
Handling
Quality
Others
Printer menu
Print Sta-
tus Page
Interface
Emulation
Page Set
Print
Paper
RAM DISK
Mode
Select item.
Font
Color Mode
Handling
Quality
Others
RAM DISK Mode
List of
Read Delete
Printer menu
Partitions
Back
Write Data
RAM Disk
Size
Off
On